Infinity Gauntlet - Assembly & Completion

Alright, so after you have the LEDs wired up and ready to go you're ready for the next steps.  I don't have many pictures of this because I did it all in less than 24 hours to make sure I had it ready and wrapped in time for Christmas, but I'll try to walk you guys through the steps the best I can.

Now that you have your rivets, paper prototype, and LEDs ready to go the next step is to actually assemble the gauntlet using your metal....right?  Nope!  I did it with poster board and ArtEmboss Aluminum!  I don't have any pictures of a few of my products/materials I used for this process so I'm going to link them up here below.

• Poster board (.50 at Dollar Tree)
• Scissors
• Gauntlet Template
• Xacto blade
• Bag of assorted oval acrylic gems* 
• Hot glue sticks & hot glue gun
• Snap Fasteners
• Thin elastic cord

*Note*: For the Acrylic Gems I ended up buying 2 bags in store.  As the description in the link says, the bag includes assorted colors so you don't know what you'll end up with.  Purple was very hard to find so I sat there in the store trying to flip the gems around in the bag until I could get a clear view of what color they were.  I ended up buying 2 bags because 1 had purple and 1 had red.  

Also, since there is no yellow gem in that pack, I used a yellow fabric for the back of the white gem and a yellow highlighter....It'll be our little secret, okay?  I think yellow nail polish could have worked too.  The backside of the gems are silver metallic which I sanded off with sand paper.  I probably didn't need to do that since the LEDs are so bright they could have shown right through it, but I like how it turned out.

Infinity Gauntlet - LED wiring

I'm sure this is the moment you've all been waiting for!  LED wiring for the Infinity Gauntlet.  First off I want to give a big thanks to my friend Ron for helping me clean up the LEDs.  And also for teaching me about lemons!  I'll get more to that later.  Before I start with the step by step tutorial, I have to let everyone know that going into this project I had no knowledge LEDs, resistors, wiring, etc except what I have learned and forgotten from high school and college.  So even if you have no knowledge of wiring up LEDs, I'm hoping that with this tutorial, safety, and a little bit of practice, you too can have LEDs to light up your infinity gauntlet.

What you'll need (not all items pictured):

• Soldering Tool Kit (Should have Iron, soldering wire at minimum)
• 6 white LEDs (Radio Shack #276-0320)
• 6 resistors (160-Ohm 1/4 Watt Carbon Film Resistors)  They come in a 5 pack...
• 1 AAA qty4 holder with on/off switch included
• Lemon juice aka Citric Acid Flux
• Wire cutters
• Hookup Wires (Red - Positive & Black - Negative)

Optional

• Electrical tape
• Heat Shrinkable Wire Wrap (I highly recommend this since it helps keeps the wires clean)
• Wire Stripper/Crimper

I basically walked into Radio Shack and told them what I was trying to do and how many LEDs I needed.  The associate was really helpful and at the same time not.  He was able to put my request into his little wizard and it popped out the necessary items I need, and the circuit it should be in, but beyond that he wasn't much help.

Here are the Youtube videos that I believe will be helpful for you:
Series and Parallel Circuits (I didn't watch this until I messed up the circuit so make sure you watch this first!)
LED Tutorial - Part 1
How and WHY to Solder Correctly

Infinity Gauntlet - Paper prototype

Hi Everyone!  How has your new year been so far?  Here's my first post for 2013!  I can feel that it's going to be quite the exciting year. Especially since I just made another Etsy sale!!  *happy dance*  Okay, enough diddle daddling and to the point now.  Time for the infinity gauntlet prototype post.

• Left Yellow glove (since the template is for the left or flip template for right hand)
• A print of David Guyton's Gauntlet template
• Thumb tacks (from the Dollar Tree)
• Tape
• Pliers optional

So my boyfriend loves comic books and has always told me about the Infinity Gauntlet and how he wants one.  Every time we walk around a craft store or random shop and he sees gems he would pick them up and wonder if they can be incorporated into a gauntlet some how.  So one day after Halloween I was Googleing and You Tubing other random projects such as resin masks and props and one video caught my eye.

"How to Make a Gauntlet Armor Tutorial" by David J. Guyton

The gold gauntlet caught my eye and not to mention it's a tutorial!  I clicked on the video and watched it and was throughly impressed.  What made this video more amazing was that he was selling the template for $5.  I was a little worried at first since the video was posted in 2010 and didn't know if I would get the template or even a response if I paid for the template, but I noticed that David is really quick in providing youtube responses so I gave it a go.  After I paid for the template he responded with the gauntlet template within in 24 hours!  Also, he just posted a new video today for gauntlet version 2 so you'll have some options for your design!  The video above suggest that you make a paper prototype first so that's exactly what I did.